Skip to content
Phoenix Mobile Windshield Replacement
Menu

Guide

How long does a windshield replacement take?

Updated November 19, 2026

The short answer has two parts. The installation itself usually takes one to two hours. After that, the car has to stay parked until the adhesive reaches its minimum drive-away time, and a camera calibration adds time when your car needs one.

The part that is not up to the installer

Urethane adhesive is what holds a new windshield in place, and in a crash that bond helps the car protect the people inside. The auto glass replacement safety standard, ANSI/AGSC/AGRSS 005-2022, defines the minimum drive-away time as the time a given adhesive needs to reach the strength the adhesive maker specifies for the federal crash standards. The same standard says the installer must tell the vehicle owner that time before and after the installation.

So the drive-away time is not a guess or a sales promise. It comes from the adhesive maker's chart for the product used on your car and the conditions on the day.

Why Phoenix weather changes the time

Windshield urethanes cure by reacting with moisture in the air. Heat speeds the reaction, but very dry air supplies less water, so a hot, bone-dry Phoenix afternoon does not always mean a faster cure. One adhesive maker lists its best working range for the glass and the adhesive at 59 to 77 degrees Fahrenheit, which a Phoenix driveway can leave behind before mid-morning in summer.

The Auto Glass Safety Council, the industry group behind the standard, says minimum drive-away times vary by the type and brand of adhesive and by the weather at the time of installation. That is why we give you the time on the day of the job instead of a number in advance.

Where a camera calibration fits in

If your car has a camera on the windshield, the calibration comes after the glass is in. The standard says a dynamic calibration, the kind done on the road, should start only once the minimum drive-away time has passed. A static calibration may be done while the car is parked, when the procedure and the place allow it.

What to plan for

  • Plan for the installation plus the drive-away time, and add time if your car needs a calibration.
  • Keep the car parked until the technician says the drive-away time has passed.
  • Ask the technician about anything you are unsure of before you drive.

Ready to book? Call (623) 462-9050 with your year, make and model, or read about ADAS calibration if your car has a windshield camera.

Questions about your windshield?

Call (623) 462-9050